ALABINE SVB Series Inks

Ⅰ、Description

       ALABINE SVB series inks, which prepared with special mixed-resin, extra fine fillers and pigments, and so on, are not only feeling fine and smooth, but also of good leveling and printability. The after-treatment on the presswork is feasible, such as punching, drilling, cutting, etc. The film is alcohol resistant， chemical resistant and sterilization resistant.

     Ⅱ、Recommended Application

◆ Recommended substrate: Harden PC, harden PMMA, the surface of UV coating, electroplating layer, etc.

◆ Recommended for: Windows screens, the phone keypad, the phone shell, etc.

Ⅲ、Proposed Operation

       Prepare: To clean the surface with ALATIVE SC5 treater and make sure non-dust, non-grease. To dilute the Ink with 3-20% ALATIVE SR6 thinner（In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）. Mix the ink with the ALATIVE SA5 (10-15%, to total) activator completely and then is ready.

       Mesh count: 70T to 180T

       Drying: Air dry in 12-18 hours, or forced dry at 80 ^OC in about 40 minutes.

       Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner.

      Ⅳ、Color & Packaging 
       Color: More than 20 kinds of colors for selection and with professional mixed-color service.

       Packaging: 1kg/can, 5kg/barrel, 20kg/barrel